|
BP SX320 Solar Panel / Universal Frame
The BP SX 320 photovoltaic module is part of BP Solar's SX module series, providing cost-effective photovoltaic power for DC loads with moderate energy requirements. With 36 multicrystalline cells in series, this panel charges batteries efficiently in virtually any climate. Typical commercial applications of this module include remote telemetry, cathodic protection, instrumentation systems, security sensors, signals, oil metering, water metering, residential gate and land-based navigation aids. 1. The Universal Frame model (SX320J) has a junction box and a very rugged frame. The junction box accepts cable or conduit. The standard terminals accept 8 AWG to 14 AWG wire. The raintight (IP65 Rated) junction box of the SX 320J accepts PG13.5 or 1/2" nominal conduit or cable fittings. With its four-terminal connection block, it enables most system array connections (putting modules in series or parallel) to be made right in the junction box.
The SX320 is intended for 12VDC or 24VDC solar battery charging systems (charge controller highly recommended). It is ideal for longevity outdoors; with an anodized aluminum frame and tempered glass that will withstand a 1" hailstone traveling 52 MPH. The SX320 is approved by Factory Mutual Research for application in NEC Class 1, Division 2 FM, Groups C & D hazardous locations and approved for explosion resistance. This certification is required near gas and oil pipelines. SX320
PDF Spec sheet
Government, educational and corporate P.O.s & IMPAC cards accepted. BP SX320
Call toll-free (877) 297-0014 for more information or to order.
|
BP
Solar SX 320 20W 
2.
The Multimount Frame version (SX320M) has a AWG# 18 2 conductor
15' cable for convenient 12 volt battery charging (an inexpensive
charge regulator is recommended). The SX 320M can also be configured
in series for a nominal 24VDC system.
|
|
