prosolar, solar mount, rooftrac, tile track, foam jack, rack

Prosolar Rooftrac Residential Mounting System

Our standard residential grid-tie systems include the Rooftrac support rails & module clamps.
Choose one of the mounting support options for your roof type below:

Mounting Support Options:

• Fast Jack
• Tile Track
• Tilt-Up Kit
• Rail Splice Kit

Roof Trac Support Rail

The Rooftrac photovoltaic (PV) solar panel mounting system is a patented top-down roof mounting solution designed and manufactured with the installer in mind. This innovative design incorporates anodized lightweight aluminum components to allow for maximum transportation and installation efficiency. The lightweight nature of the aluminum rail utilizes the basic laws of physics to create structural competence rather than just bulking up the rail in height adding unnecessary and costly aluminum. With this design, the RoofTrac system system holds the lowest engineered profile to the roof in the industry.

1.5" Rail

Channel Nut

The RoofTrac mounting system has been load-tested and engineered to 125mph wind load (50 lbs/square foot of pressure load) for most module types. Roof Trac secures the solar panels and prevents damage caused from high-winds and seismic forces. The Roof Trac support rail was designed to conceal all attachment hardware. All connections are made inside the support rail hidden from view. All exposed aluminum is fully anodized to module manufacturer specifications. The Roof Trac rail must be drilled on site for connection to Tile Trac or Fast Jack.

Module Clamps

End Clamps

Inter-module Clamps

The clamping system consists of end clamps and mid clamps to attach the module frame to the Roof Trac support rail. This fully integrated clamping system actually changes the structural properties of the aluminum channel making it significantly stronger. This design allows solar modules to be installed at a lower profile to the roof, providing a more aesthetically pleasing installation. Module clamps are specifically designed, extruded and engineered for each specific module frame. Our innovative clamping system provides inward tension on the module frame securing the laminate in the frame. Channel nuts slide easily into position to hold the end clamps and mid clamps.

Click here for the Roof Trac Brochure in PDF format.

Click here for the Roof Trac installation guide in PDF format.

Fast Jack Mounting Option

The Fast Jack attachment provides a quick and strong installation solution. The patented design places the bolt directly under the stanchion post where it provides the most support. This feature allows standard roof flashings to lay flat on the roof deck. The removable post allows flashings to be slipped over the base without damaging surrounding composition shingles.

The FastJack is an engineered and flashable roof stanchion
designed for optimum strength while using a single lag bolt.

Specifications

Materials:	Tumbled Aluminum Stainless Steel Hardware
Engineering:	2,359 lbs Vertical 808 lbs. Side Axial
Product Integration:	RoofTrac Integration
Order #s:	FJ-300-18 (3" Box of 18) FJ-450-18 (4-1/2" Box of 18) FJ-600-18 (6" Box of 18) FJ-750-18 (7-1/2" Box of 18)

Click here for the Fast Jack Brochure in PDF format.

Tile Track Mounting Option

TT-18T with 6" all thread
for tile roof

TT-18S 1.5" Short Stud
for comp shingle roof

The TileTrac attachment device is the
perfect solution for composition shingle
and concrete tile roofs. The Tile Trac
design allows for a low profile to the roof
while still enabling water and debris to
naturally shed from the roof.

The main advantage of the Tile Trac
system is that it can work with almost any
roof type and does not require flashing.

The Tile Trac attachment system is the perfect
base for surface mounting on composition roofs.
It has over 10 square inches of base to prevent
damaging delicate composition shingles and it
allows easy positioning of the bolt or all-thread
that secures the support rail.

Click here for the Tile Trac brochure in PDF format.

Click here for the Tile Trac installation guide in PDF format.

Tilt-Up Kit

The Rooftrac Tilt-Up Kit is an easy-to-install accessory for your RoofTrac system. This kit allows your solar array to be tilted at the optimum angle.

Engineering: 50 lbs per square ft. (Selected modules only). 125 MPH approximate wind load. Modules supported by the tilt-up kit:
BP Solar
Kyocera
Sharp
SolarWorld

Click here for the Tilt-Up Kit installation guide in PDF format.

Rail Splices

The splice kit allows multiple lengths of support rail to be secured at time of installation. Hindling excessively long pieces of rail can be daunting to the installer and logistically difficult to transport to the job site. The splice kit allows both the freight company and the installation company to transport the rail more easily and economically. The splice kit can be installed to allow for the expansion and contraction of the aluminum channel when installed at longer lengths.