Skip to content

Magnum MM612AE Inverter/Charger

The Magnum MM612AE is a Cost Effective Inverter/Charger

The Magnum MM612AE Inverter/Charger from Magnum Energy is a modified sine wave inverter providing a cost effective solution for those with smaller power needs in off-grid solar panel power systems. Versatile, easy-to-use, and lightweight, the MM-AE Series provides a reliable base for your energy system.
  • Power Factor Corrected (PFC) Charger:
  • Our PFC charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger – using only 7.5 amps per 50 amps versus 12.5 amps used by standard chargers.
  • Attractive styling:
  • The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation.
SKU MM612AE
  • You asked and Magnum listened.
  • The MM-AE Series Inverter/ Charger is loaded with features:
  • Standard transfer relay:
  • The standard 20 amp transfer relay will pass AC power through the inverter when using grid or generator power.
  • Versatile mounting:
  • Mount the MM-AE Series on a shelf, wall, or even upside down.
  • Fan cooled:
  • The MM-AE Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.
  • Low battery protection:
  • If your battery voltage goes below the cut-out setting the MM-AE Series will automatically shut down, saving your batteries.
  • High battery protection:
  • If your battery voltage reaches over the cut-out setting the MM-AE Series will shut down.
  • Current overload protection:
  • The MM-AE Series will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage.
  • Convenient switches:
  • The MM-AE Series comes with an on/off frontmounted switch with an easy-toread LED indicator.
  • Circuit breaker protection:
  • Every model comes with built in input and output circuit breakers for ease of installation.
  • Battery temp sensor:
  • The standard battery temp sensor monitors temperatures from 0 - 50° C.
  • Buy with ease:
  • The MM-AE Series is backed by a two-year (24-month) parts and labor warranty

Accessories and Options*

  • Remote control:
  • Optional remotes are available for the MM612AE, including the MM-RC, and the ME-RC. A four wire phone jack comes standard with the unit to connect the remote.
  • Fuse Blocks

The MM-AE Series Inverter/Charger MM612AE

Specifications

MM612AE

Inverter Specifications

Input battery voltage range

9 to 16 VDC

Nominal AC output voltage

120 VAC ± 5%

Output frequency and accuracy

60 Hz ± 0.005%

1 msec surge current (amps AC)

27

100 msec surge current (amps AC)

11

5 sec surge power (real watts)

1100

10 sec surge power (reall watts)

1050

30 sec surge power (real watts)

1000

5 min surge power (real watts)

950

30 min surge power (real watts)

675

Continuous power output at 25° C (with 1.0 PF)

600 VA

Continuous current output

5 AAC

Rated input battery current

60 ADC

Inverter efficiency (peak)

95%

Transfer time

16 msecs

Search mode

.1

No load (120 VAC output)

.77 ADC

Waveform

Modified Sine Wave

Charger Specifications

 

Continuous output at 25° C

30 ADC

Charger efficiency

85%

Power factor

> 0.95

Input current at rated output (AC amps)

4

General Features and Capabilities

Transfer relay capability

20 AAC (input current for charging and pass through)

Battery temperature compensation

Yes,standard temp sensor (battery temp 0 – 50° C)

Remote available (optional)

Yes, MM-RC or ME-RC

Internal cooling

0 to 59 cfm variable speed

Overcurrent protection

Yes, with two overlapping circuits

Overtemperature protection

Yes on transformer and MOSFETS

On/Off with status indicator

Yes, front mounted and easily accessible

Low battery cutout

10 or 20 VDC, adjustable on most models with the ME-RC remote

AC output and input

Hardwire

Output circuit breaker

7 A switchable

Input circuit breaker

8 A

Listings

NA

Warranty

Two years

Environmental Specifications

Operating temperature

-20° C to +60° C (-4° F to 140° F)

Nonoperating temperature

-40° C to +70° C (-40° F to 158° F)

Operating humidity

0 to 95% RH non condensing

Physical Specifications

Dimensions (l x w x h)

16.6” x 8.4” x 4.7” (42 cm x 21 cm x 12 cm)

Mounting

Shelf (top or bottom up) or wall (vents up)

Weight

14 lb (6.4 kg)

Max operating altitude

15,000’ (4570 m)

Construction

ABS plastic top and cast aluminum bottom