Outback
FLEXware 1000
For
applications with large power requirements such as large residential,
commercial or village power systems.
The FLEXware 1000 system architecture is capable of supporting
up to four OutBack FX Series Inverter/Chargers, four OutBack charge
controllers, and all the required AC and DC components and wiring.
Utilizing a compact design, FLEXware 1000 AC and DC enclosures
accommodate all of the essential protective devices with lots
of room for additional breakers and large cable connections and
can be mounted either vertically or horizontially.
Model:
FW1000-DC
DC enclosure which mounts at the DC side of three or four FX Series
Inverter/Chargers. Supports up to eight terminal bus bars (not
including GBB) and up to three shunt assemblies depending on configuration
Includes:
Ground bus bar, 1000 Amp DC shunt assembly, positive bus, breaker
mounting hardware, enclosure mounting hardware, two FW-SBUSs and
one FLEXware 1000 breaker bus
Model: FW1000-AC
AC enclosure which mounts at the AC side of three or four FX Series
Inverter/Chargers. Supports eight terminal bus bars and one FW-X240.
The FW1000 system utilizes two FW-MPs (mounting plates) and a
set of the DCA and ACA conduit adapters for each inverter/charger.
DC and AC breakers, Input-Output-Bypass Assemblies and all other
additional components sold separately.
Includes:
Ground bus bar, two DIN mounting brackets and FLEXware 1000 wiring
raceway
FLEXware
1000
Model: FW1000-DC |
Description:
DC enclosure which mounts at the DC side of three or four
FX Series Inverter/Chargers. Supports eight terminal bus bars
(not including GBB) and up to three shunt assemblies (depending
on configuration).
Includes: Ground bus bar, 1000 Amp DC shunt assembly,
positive bus, breaker mounting hardware, enclosure mounting
hardware, two FW-SBUS and one FLEXware 1000 breaker bus. |
| Unit
Dimensions (H x W x D) |
Shipping
Dimensions (H x W x L) |
Shipping
Weight |
Enclosure
Type |
38.5
x 11.4 x 12.1”
(97.8 x 29 x 30.7 cm) |
14.5
x 13.6 x 40.6”
(36.8 x 34.5 x 103.1 cm) |
21 lbs.
(9.5 kg) |
Type-1
indoor (IP30) |
FLEXware
1000
Model: FW1000-AC |
Description:
AC enclosure which mounts at the AC side of three or four
FX Series Inverter/Chargers. Supports eight terminal bus bars
and one FW-X240. The FW1000 system utilizes two FW-MPs (mounting
plates) and a set of the DCA and ACA conduit adapters for
each inverter/charger. DC and AC breakers, Input-Output-Bypass
Assemblies and all other additional components sold separately.
Includes: Ground bus bar, two DIN mounting brackets
and FLEXware 1000 |
| Unit
Dimensions (H x W x D) |
Shipping
Dimensions (H x W x L) |
Shipping
Weight |
Enclosure
Type |
38.5
x 11.4 x 12.1”
(97.8 x 29 x 30.7 cm) |
14.5
x 13.6 x 40.6”
(36.8 x 34.5 x 103.1 cm) |
21 lbs.
(9.5 kg) |
Type-1
indoor (IP30) |
•
The FW1000 system utilizes one FW-MP mounting plate and a
set of the DCA and ACA conduit adapters for each inverter/charger.
• DC and AC breakers, Input-Output-Bypass Assemblies
and all other additional components sold separately. |
|
Picture
on left shows four Outback inverters
with four MPPT charge controllers and
FLEXware 1000 enclosures on each end of the inverters
(one AC and one DC). |
Breaker
Configuration
AC side:
The breaker configuration will hold up to thirty-two DIN mount
breakers (not included). The FW1000 has support for an optional
AC Input-Output-Bypass Assembly. AC breakers
are rated from 10-60 Amps of Amps of AC current.
DC Side:
Holds up to eleven 0.75" (19mm) wide breakers rated for 1-80
Amps of DC current, nine 1" (26mm)wide breakers rated for
100 or 125 Amps of DC current or six 1.5" (32mm) wide breakers
rated for 175 or 250 Amps of DC current.
FLEXware 1000
AC Input-Output-Bypass Assemblies
Field installable
kit for bypassing the AC input to the AC output for inverter maintainence
or installation. Also provides over-current protection.
| Model:
FW-IOB-T-120/208VAC |
| Includes:
Nine 60A 120VAC single pole DIN mount breakers, sliding bypass
interlock plate, wire and hardware kit
|
| System
Rating |
Bypass
Breaker |
Input
Breaker |
Output
Breaker |
Three
Phase 120/208 VAC
60 Amp 21.6 kW |
Three
Poles @ 60 Amps 21.6 kW |
Three
Poles @ 60 Amps 21.6 kW |
Three
Poles @ 60 Amps 21.6 kW |
| Model:
FW-IOB-Q-120/240VAC |
| Includes:
Eight 60A 120VAC single pole DIN mount breakers, two 60A 120VAC
dual pole DIN mount breakers, sliding bypass interlock plate,
wire and hardware kit
|
| System
Rating |
Bypass
Breaker |
Input
Breaker |
Output
Breaker |
Split
Phase 120/240 VAC
120 Amp 28.8kW |
Four
Poles @ 60 Amps 28.8 kW |
Four
Poles @ 60 Amps 28.8 kW |
Four
Poles @ 60 Amps 28.8 kW |
Click
here
for the FLEXware
1000 installation guide
Call
toll-free (877) 297-0014
to speak with an experienced representative.
