Outback FLEXware 500

OutBack Power Systems FLEXware 500 supports up to two inverter/chargers and two charge controllers in an attractive, versatile and code-compliant package for installations where more power is needed.

The FLEXware 500 system provides ample locations for additional breakers, DC-current shunts, an autotransformer and other items required in higher kW systems. The FLEXware MP Mounting Plate shows the versatility of the FLEXware line. The picture shown to the right shows the FLEXware 500 AC and DC enclosures with two inverters and two MX60 charge controllers.

The FLEXware 500 based complete system will satisfy a majority of renewable energy applications with large power requirements such as residential, light commercial or rural electrification systems by supporting up to two FX series inverter/chargers and up to two MX charge controllers. FLEXware 500 AC and DC enclosures accommodate all the essential protective devices while still providing plenty of room for additional breakers and large cable connections in addition to the ability to be mounted vertically for added versatility, FLEXware 500 and IOB-D-120/240VAC and HUB4. Two-inverter systems also come with a X-240.

FLEXware 500 Model: FW500-DC
Description: DC enclosure which mounts at the DC side of one or two FX Series Inverter/Chargers. Supports six terminal bus bars (not including GBB) and three shunt assemblies. Includes: Ground bus bar, 500 Amp DC shunt assembly, positive bus, breaker mounting hardware, FW-BBUS and enclosure mounting hardware
Unit Dimensions (H x W x D)	Shipping Dimensions (H x W x L)	Shipping Weight	Enclosure Type
18.2 x 11.4 x 12.1” (46.2 x 29 x 30.7 cm)	14.5 x 13.4 x 20.3” (36.8 x 34.1 x 51.6 cm)	15 lbs. (6.8 kg)	Type-1 indoor (IP30)

---

FLEXware 500 Model: FW500-AC
Description: AC enclosure which mounts at the AC side of one or two FX Series Inverter/Chargers. Supports six terminal bus bars and one FW-X240. Includes: Ground bus bar, DIN mounting bracket, communication cable conduit and enclosure mounting hardware
Unit Dimensions (H x W x D)	Shipping Dimensions (H x W x L)	Shipping Weight	Enclosure Type
18.2 x 11.4 x 12.1” (46.2 x 29 x 30.7 cm)	14.5 x 13.4 x 20.3” (36.8 x 34.1 x 51.6 cm)	15 lbs. (6.8 kg)	Type-1 indoor (IP30)
• The FW500 system utilizes one FW-MP mounting plate and a set of the DCA and ACA conduit adapters for each inverter/charger. • DC and AC breakers, Input-Output-Bypass Assemblies and all other additional components sold separately.

Picture on left shows two Outback inverters with two MX60 charge controllers and FLEXware 500 enclosures on each end of the inverters (one AC and one DC).

---

Breaker Configuration for FLEXware 500:

---

FLEXware 500 AC Input-Output-Bypass Assemblies
Field installable kit for bypassing the AC input to the AC output for inverter maintainence or installation. Also provides over-current protection.

Model: FW-IOB-D-120/240VAC
Includes: Six 60A 120VAC single pole DIN mount breakers, sliding bypass interlock plate, wire and hardware kit
System Rating	Bypass Breaker	Input Breaker	Output Breaker
Single Phase 120VAC 120 Amp 14.4 kW	Two Poles @ 60 Amps 14.4 kW	Two Poles @ 60 Amps 14.4 kW	Two Poles @ 60 Amps 14.4 kW

---

Model: FW-IOB-D-120VAC
Includes: Six 60A 120VAC single pole DIN mount breakers, sliding bypass interlock plate, wire and hardware kit
System Rating	Bypass Breaker	Input Breaker	Output Breaker
Single Phase 120VAC 120 Amp 14.4 kW	Two Poles @ 60 Amps 14.4 kW	Two Poles @ 60 Amps 14.4 kW	Two Poles @ 60 Amps 14.4 kW

Call toll-free (877) 297-0014 to speak with an experienced representative.