class 1 div 2, c1 d2, division, MAPPS, RAPS, review, stand-alone, remote, weatherproof complete solar power system
remote solar system

MAPPS
Class 1 Div 2 Solar Systems

MAPPS

CI DII solar system

C1 D2

MAPPS™ CI DII Series
Remote Area Photovoltaic Systems for Class I Div II Hazardous Locations

reviewDescription

Our MAPPS™ Class I Division II line of solar power systems. One of the world's top safety testing labs, CSA, has independently certified these systems as safe for use in the highest level of hazardous locations such as a potentially explosive environment where there is the possible presence of flammable gases, vapors or liquids. This system line is the first solar power system in the world to meet CSA's most rigorous Class I Div II, Class A, B, C, and D hazardous location safety standard.
This important feature allows the complete Class I Div II system to be placed directly adjacent to the pipeline or wellhead, saving installation time and materials.
Using our Class I Division II systems insure that no matter what your location or application , you can safely and reliably generate electricity to power your equipment anywhere the sun shines, even under the most hazardous conditions.

class 1 division 2Typical Class I Div II Applications:

• Gas wellheads
• Gas pipelines
• Chemical refineries
• Oil refineries
• Offshore oil platforms
• Air monitoring

Only the Best Class 1 Division 2 rated components are used in our MAPPS™ systems:

• High efficiency UL Listed, Class I Div II rated solar panels with 20+ year warranty
• Heavy-duty aluminum pole mounting structure with stainless steel hardware
• Solar array Class I Div II approved conduit wiring harness kit
• UL Listed NEMA 3R durable powder-coated white aluminum battery control and component enclosure, lockable, includes sticker on inside door with specific Class I Div II certification
• Sealed gel cell, maintenance free, deep-cycle, non-spillable batteries, UL Recognized
• Advanced PWM Charge Control, Class I Div II rated, with low voltage load protection and temperature compensated battery charging
• Extra room for your equipment - each system package has roughly 12 cu/in of extra space in the electronics compartment. There is plenty of room for you to add your own Class I Div II rated SCADA, radio, GPS, telemetry, VSAT, Wi-Fi or other electronic equipment.
• CSA Approved Class I, Div. II hazardous location safety rating

Want us to design a custom system for you? Please fill out our solar sizing form for a customized quote click here

What does a Class I Div II certified system mean to you?

It means that the world's most trusted name in testing, Underwriters Laboratories, has independently certified these systems as safe for use in the highest level of hazardous locations like potentially explosive where there is the possible presence of flammable gases, vapors or liquids. This system line is the first solar power system in the world to meet UL's most rigorous hazardous location safety standard.

Using these systems insures - no matter what your location or application - that you can safely and reliably generate electricity to power your equipment anywhere the sun shines, even under the most hazardous conditions.

These systems are the only complete stand alone solar electric systems designed for industrial, oil gas & mining and telecom applications that can be approved for Class I, DIV. II hazardous locations (UL Pending).

reviewMAPPS Design Steps:

1. Calculate your Power Requirements
Determine the Amp-hours per day for all of the equipment you want to power. Consider both continuous and intermittent loads in a 24-hour period. Average over a week if loads change daily. Test the actual power draw of the equipment if you can.

2. Determine your Solar Insolation Zone
Locate your site on the map below. The map represents average solar energy available in the winter. Available energy increases incrementally from zones 1 through 5.

3. Use the Performance Table to Choose your System
The tables below represent the Amp-hours per day performance of each MAPPS system in the different solar zones. Choose your system voltage, then look down your solar zone column for the value that meets or exceeds your design load Amp-hours. Follow the row to the left for the corresponding prepackaged MAPPS system that will fully power your load requirements.


Class 1 Division 2

contact for review

support

Call toll-free (877) 297-0014 for expert assistance

 

Solar Rebates
Federal Solar Stimulus
Solar Performance Calculator
CSI Rebate Calculator
CSI Rebate Calculator

Complete
System
Grid-Tie
Residential Grid-Tie
Industrial Grid-Tie

Stand Alone
Enclosed Industrial System

Solar Panel
Sharp
NE-80EJEA
ND-130UJF
NE-165U1
NE-170U1
NT-175UC1
NT-187U1F
ND-208U1
ND-216UC1
ND-224UC1
ND-U230C1
NU-U230F3
NU-U235F1

Kyocera
KD135SX-UPU
KD185GX-LPU
KD205GX-LPU
KD210GX-LPU
KD215GX-LPU
KD135SX-UPU
KC130TM
KC85
KC50

Sanyo
HIT Power 186
HIT Power 190
HIT Power 195
HIT Power 200
HIT Power 205
HIT Power 205N
HIT Power 210N
HIT Power 215N
HIT Bifacial 180
HIT Bifacial 186
HIT Bifacial 190
HIT Bifacial 195
HIT Bifacial 200

Alps
ATI-2000(230)

Yingli
YL230P-29b

TrinaSolar
TSM-220DA05
TSM-230DA05
TSM-240DA05

Suntech
STP210-18
STP175S-24

Evergreen
ES-A-200 (black)
ES-A-205 (black)
ES-A-210 (black)
ES-A-200
ES-A-205
ES-A-210

Mitsubishi
UD185MF5
UE125MF5N
NF120EC4

BP
BP 3230T
BP 3225T
BP 3220N
BP 3215B
BP 3195
BP 3160
BP 3125U
BP 380
BP 375
BP 365J
BP 350J
SX60U
SX330J
SX320J
SX310J
SX5M

Schuco
SPV 210 SMAU-1

Canadian Solar
CS6P-200P
CS6P-210P
CS6P-220P
CS6P-230P
CS6P-240P
CS6P-240M

REC SCM
ScanModule

Kaneka
Amorphous

Inverter
Grid Tie
Fronius
SMA
PV Powered
Solectria
SatCon
Enphase

MC Cables
Solarline 1-2

Fat Spaniel
Monitoring Software

 

Home

Contact

Contractors

Residential
Solar

Commercial
Solar

Remote
Industrial

Solar Panels

Solar Panel
Mounts

Inverters

Solar Combiners

Pre-Wired
Power Panels

Batteries

Charge
Controllers

Complete Systems

Rebates

Solar Links

Sharp

Suntech

Sanyo

BP Solar

Evergreen Solar

Unisolar

Fronius

Sunny Boy

CEC Rebate
California State
R4 Authorized
Reseller

 

 

 

 

 

 

 

 

 

 

 

 

©2001-2008 Solar Electric Supply
All Rights Reserved