Skip to content

OUTBACK FLEXware 250

OutBack Power Systems FLEXware 250 is an an affordable solution for solar and backup power.For applications with modest power requirements such as cabins, remote communication sites and back-up power systems..

The FLEXware 250 accommodates all of the essential protective devices in the smallest possible space at the lowest installed cost. Utilizing an extremely compact design and unique mounting features, one or two FLEXware 250 enclosures can be mounted on each end of a single FX Series Inverter/Charger.

TheFLEXware 250 enclosure is contructed of powder-coated aluminum and has been ETL listed. It provides breaker spaces for battery, PV array or PV GFP breakers and mounting locations for AC GFCI outlet, AC breakers and even an Input-Output-Bypass Assembly. In keeping with the philosophy of FLEXware, the flexibility of this configuration is evident in the generous number of knock-outsallowing the installation of conduit, cable glands and other installation accessories.

Designed to survive in outdoor environments, the rainproof, UL type 3R powder coated aluminum chassis can be mounted on a wall, sloped roof or pole. The unique angled negative terminal bus bar design makes wiring fast and easy without the larger output conductors blocking access to the smaller input terminals. Dual output lug terminals are included for up to 2/0 AWG conductors. The tinted flame-retardant polycarbonate deadfront panel creates a clean appearance while preventing accidental contact with the live terminals and is easily removable during installation.

SKU FW250

Description

Model
Unit Dimensions(H x W x D)
Shipping Dimensions(H x W x L)
Shipping Weight
Enclosure Type
FW250 7.5 x 6.5 x 8.6"
(19.1 x 16.5 x 21.8cm)
9.75x 8.4x 11.6"
(24.8x 21.3x 29.5)
5lbs. (2.3kg) Type-1 indoor(IP30)

•Holdsup to eight 1 to 80 Amp, one 175 or 250 Amp panel mount breaker and a GFCI AC outlet (not included).
• Does not use the DCA or ACA for connection to an FX Inverter/Charger.
• DC current shunt not included

FLEXware 250 enclosures

FLEXware 250 AC Input-Output-Bypass Assemblies

Field installable kit for bypassing the AC input to the AC output for inverter maintainence or installation. Also provides over-current protection.

Model: FW-IOB-S-120VAC

Includes:Three 60A 120VAC single pole PANEL mount breakers, sliding bypass interlock plate, wire and hardware kit

System Rating
Bypass Breaker
Input Breaker
Output Breaker
Single Phase 120VAC
60 Amp 7.2 kW
One Pole @ 60 Amps 7.2 kW One Pole @ 60 Amps 7.2 kW One Pole @ 60 Amps 7.2 kW