![]() |
|
Details
Accessories and Options*
- Remote control: For convenient finger-tip operation, including the new one-knob™ programming.
- AGS module: Automatically starts and stops your generator based on temperature or battery voltage.
- Battery Monitor Kit
- DC Load Disconnect
- Fuse Blocks
- Remote Switch Adapter
- Series Stacking Interface
The RD Series Inverter/Charger RD2212
Specifications |
RD2212 |
|||
---|---|---|---|---|
Inverter Specifications |
||||
Input battery voltage range |
9 - 16 VDC |
|||
Nominal AC output voltage |
120 VAC |
|||
Output frequency and accuracy |
60 Hz ± 0.005% |
|||
1 msec surge current (amps AC) |
60 |
|||
100 msec surge current (amps AC) |
37 |
|||
5 sec surge power (real watts) |
3700 |
|||
30 sec surge power (real watts) |
3450 |
|||
5 min surge power (real watts) |
3100 |
|||
30 min surge power (real watts) |
2400 |
|||
Continuous power output at 25° C |
2200 VA |
|||
Rated input battery current |
191 ADC |
|||
Inverter efficiency (peak) |
95% |
|||
Transfer time |
16 msecs |
|||
Search Mode |
.2 ADC |
|||
No Load (120 VAC output) |
.87 ADC |
|||
Waveform |
Modified Sine Wave |
|||
Charger Specifications |
||||
Continuous output at 25° C |
110 ADC |
|||
Charger efficiency |
85% |
|||
Power factor |
> 0.95 |
|||
Input current at rated output (AC amps) |
15 |
|||
General Features and Capabilities |
||||
Transfer relay capability |
2 legs at 30 A for 120 V/30 A or 240 V/60 A service |
|||
Five stage charging capability |
Bulk, Absorb, Float, Equalize, and Battery Saver™ |
|||
Battery temperature compensation |
With available temp sensor (battery temp 0 – 50° C) |
|||
Remote inverter on/off switch |
With available pigtail to connect to dry contact |
|||
Internal cooling |
0 to 120 cfm variable speed drive using dual 92mm brushless DC fans |
|||
Overcurrent protection |
Yes, with two overlapping circuits |
|||
Overtemperature protection |
Yes on transformer, MOSFETS, and battery |
|||
Conformal coating on PCB’s for corrosion protection |
Yes |
|||
Powder coated chassis & top for corrosion protection |
Yes |
|||
Stainless steel fasteners for corrosion protection |
Yes |
|||
Listings |
ETL listed to UL1741 |
|||
Warranty |
Two years |
|||
Environmental Specifications |
||||
Operating temperature |
||||
Nonoperating temperature |
||||
Operating humidity |
0 to 95% RH non condensing |
|||
Physical Specifications |
||||
Dimensions (h x w x d) |
13.75” x 12.65” x 8.0” (34.9 cm x 32.1 cm x 20.3 cm) |
|||
Mounting |
Shelf or wall (vents up) |
|||
Weight |
38 lb (17 kg) |
|||
Max operating altitude |
15,000’ (4570 m) |