Skip to content

Magnum RD3924 Inverter/Charger

The Magnum RD3924 Provides Reliable Off-Grid Power from Magnum Energy

The RD Series Inverter/Charger from Magnum Energy is a new generation inverter designed specifically for renewable energy use. The RD Series is powerful, easy-to-use, and best of all, cost effective.

Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.

Safe and reliable: The RD Series is ETL Listed to the stringent requirements of UL 1741, ensuring that the inverter is safe and reliable.

Easy-to-install: Install the RD Series in four easy steps:
1. simply connect the inverter’s output to your distribution circuits or electrical panel.
2.connect your power cable (AC) to the inverter’s easy-toreach terminal block.
3. connect the batteries.
4. and switch on the power.

SKU RD3924
  • You asked and Magnum listened.
  • The Magnum RD3924 Inverter/Charger is loaded with features:
  • Choices:
  • The RD Series comes in four power models and 12 and 24 volt models, allowing you to choose the model that is right for you.
  • Versatile mounting:
  • Mount the RD Series on a shelf or wall.
  • Lightweight:
  • The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
  • Multiple ports:
  • The RD Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
  • Accessible design:
  • The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.
  • Convenient switches:
  • The RD Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
  • Expanded transfer relay:
  • 60 Amp transfer service is available on all models.
  • Buy with ease:
  • The RD Series is backed by a two-year (24-month) limited warranty

Accessories and Options*

  • Remote control: For convenient finger-tip operation, including the new one-knob™ programming.
  • AGS module: Automatically starts and stops your generator based on temperature or battery voltage.
  • Battery Monitor Kit
  • DC Load Disconnect
  • Fuse Blocks
  • Remote Switch Adapter
  • Series Stacking Interface

The RD Series Inverter/Charger RD3924

Specifications

RD3924

Inverter Specifications

Input battery voltage range

18 - 32 VDC

Nominal AC output voltage

120 VAC

Output frequency and accuracy

60 Hz ± 0.005%

1 msec surge current (amps AC)

150

100 msec surge current (amps AC)

90

5 sec surge power (real watts)

9000

30 sec surge power (real watts)

6400

5 min surge power (real watts)

5800

30 min surge power (real watts)

4750

Continuous power output at 25° C

3900 VA

Rated input battery current

188 ADC

Inverter efficiency (peak)

93%

Transfer time

16 msecs

Search Mode

.3 ADC

No Load (120 VAC output)

.6 ADC

Waveform

Modified Sine Wave

Charger Specifications

Continuous output at 25° C

105 ADC

Charger efficiency

92%

Power factor

> 0.95

Input current at rated output (AC amps)

29

General Features and Capabilities

Transfer relay capability

2 legs at 30 A for 120 V/30 A or 240 V/60 A service

Five stage charging capability

Bulk, Absorb, Float, Equalize, and Battery Saver™

Battery temperature compensation

With available temp sensor (battery temp 0 – 50° C)

Remote inverter on/off switch

With available pigtail to connect to dry contact

Internal cooling

0 to 120 cfm variable speed drive using dual 92mm brushless DC fans

Overcurrent protection

Yes, with two overlapping circuits

Overtemperature protection

Yes on transformer, MOSFETS, and battery

Conformal coating on PCB’s for corrosion protection

Yes

Powder coated chassis & top for corrosion protection

Yes

Stainless steel fasteners for corrosion protection

Yes

Listings

ETL listed to UL1741

Warranty

Two years

Environmental Specifications

Operating temperature

-20° C to +60° C (-4° F to 140° F)

Nonoperating temperature

-40° C to +70° C (-40° F to 158° F)

Operating humidity

0 to 95% RH non condensing

Physical Specifications

Dimensions (h x w x d)

13.75” x 12.65” x 8.0” (34.9 cm x 32.1 cm x 20.3 cm)

Mounting

Shelf or wall (vents up)

Weight

45 lb (20 kg)

Max operating altitude

15,000’ (4570 m)