|
SES MAPPS Class 1 Division 2 Solar System |
|
| Model Number | MAPPS-570-198-24-C1D2 |
| Nominal System Voltage | 24 VDC |
| Solar PV Module | 3X SES 4200J 24 Vdc 200 Watts |
| Solar Module Certifications | UL 1703, Class 1 Division 2, Group A, B, C, D, Class C Fire Rating |
| PV Module Mount | SPM3-190 side of pole mount 130 MPH & 170 MPH options available |
| Battery Type | 4X Deka Solar 8G27 Gel Cell |
| Battery Capacity | 24V 198 Ahr at 100 hour discharge rate |
| Enclosure Model | AL-POL-4-G27-D4-HZ C1D2 |
| Enclosure Certifications | UL Listed NEMA 4 Industrial Control Panel Enclosure w/ NEMA 3R Battery Enclosure |
| Charge Controller | SunSaver SS-20L-24V |
| Controller Certifications | ETL for Class 1 Div 2 Groups A-D and UL 1604 & 1741 |
| MAPPS System Weight w/ Batteries | 459 lbs. |
| Origin | USA |
| Price | $10,052.00 |
600 Watt 24VDC 198Ahr Class 1 Division 2 Solar System
solar system for Class 1 Division 2 locations
Class 1 Division 2 Solar Systems
600 Watt 24VDC 198Ahr Class 1 Division 2 Solar System
Certified for Hazardous Locations
This safe, reliable, durable, and rugged 4-battery Class 1 Division 2 solar system is designed to require minimal maintenance and long life. Twenty year design life (with battery replacements approximately every five to seven years).
C1D2 certified solar electric systems have no moving parts. Solar Electric Supply deals only in modules and components with the highest international standards, such as Underwriters Laboratories (UL) and ETL Intertek listings in the US, and approval by the Commission of the European Communities (CEC) in Europe.
600W 24V Class 1 Division 2 Solar System w/ 4 8G27 batteries
Pre-wired charge controller included.
- Enclosure comes pre-assembled and pre-wired, for quality control and quick installation
- Designed for 2”-4” SCH40 pole mount
- System voltage: 24 volts DC
- Solar module and regulator are UL listed and certified
- Batteries are maintenance-free Deka Solar gel cell for deep cycle operation and extended life in solar applications
- Charge regulators include Low Voltage Disconnect (LVD) and temperature compensation
- Enclosures are powder coated aluminum for corrosion resistance and include padlockable hasps.
- Electronics are housed in a separate compartment
- Circuit breakers are included as a means of disconnect and for short circuit protection
- Systems use with SES Solar C1D2 certified PV module
- External wiring sold separately
Certifications
Conforms to: ISA STD 12.12.01 & UL STD 508A. The UL STD 508 certification is required for Class 1 Division 2 Hazardous Locations.
Class 1 Div 2 Solar Power System Applications
No matter what extreme environment on Earth: arctic, desert, coastal or tropical, this corrosion-resistant solar power system is ideal for your next remote Class I Division II Hazardous Location project.
Solar battery powered C1D2 examples can include:
flow measurement & monitoring, level measurement, oil and gas pipeline security, wireless communication, well site automation, cathodic protection, environmental monitoring, chemical injection pumps, SCADA and UPS battery backup systems.
Contact us with your solar powered application today. OEM pricing available.
Call toll-free: (877) 297-0014
MAPPS 600 Watt 24 Volt Class 1 Division 2 Solar System with 4 Batteries Review
Solar Electric Supply specializes in supplying dealer, contractor, government and industrial accounts worldwide with reliable, cost-effective Class 1 Division 2 solar electric power solutions.
Class 1 Division 2 Solar Systems · Contractor Discounts Available
Contact us toll-free: (877) 297-0014 for expert assistance and wholesale prices for the SES MAPPS 600W 24 volt Class 1 Division 2 Solar System with 4 batteries.