Charge Controllers - Xantrex - Multifunctional
As a DC load control they disconnect the load at a user settable low voltage and reconnect at the low voltage reconnect point. As a diversion controller they send excess power to a “dummy load” such as a water or space heater to regulate hydroelectric or wind generators. All of these Xantrex controllers, when used as a charge control, have field-adjustable bulk and float setpoints and perform automatic equalization every 30 days or whenever LVD is reached. Equalization can be manually initiated. The C-60 can be set to 12 or 24 volts, while the C-40 can be used at 12, 24 or 48 volts. Order the optional temperature sensor for more accurate battery charge control. The optional LCD Digital Display shows battery voltage, array amps and watts, cumulative amp-hours and a seperately resettable “trip” amp-hour measurement. The digital display is available for mounting on the front of the charge control, or with a 50 or 100 foot cable for remote mounting in a double-gang electrical box. UL Listed.
Call toll-free (877) 297-0014 for more information or to purchase.
|
The
Xantrex (formerly Trace) C-40, and C-60 PWM controllers can be used
as a PV charge control, DC load control or DC diversion regulator.
They operate in only one mode at a time, so to provide both PV charge
control and low battery load disconnect, two controls must be used.
|
Specials
|
