
SigenStor – The Smarter Solar Home
Always On. Always Ready.
An outdoor stackable LFP battery + Inverter solution with Smart Panel for Residential and Small Commercial grid tie with backup power. Also for off grid solar + storage systems. Automatically controls backup genset and loads, bi-directional 25 kW EV Charger CCS1 and NACS. Great for upgrading older PV systems.

From outdoor protection to EV charging and app-based control, SigenStor adapts to every part of your home.

Outdoor-rated design keeps your backup power ready, even in harsh conditions.

Manage, monitor, and fine-tune your energy system from the My Sigen app.

Charge your EV with clean energy and optimize usage around your schedule.

One inverter, six power ratings - configure in the field for maximum installation flexibility
The foundation of the SigenStor system, this advanced hybrid inverter provides single-SKU flexibility across six power ratings (3.8kW to 11.5kW) through software configuration. Four independent MPPT channels support up to 2:1 DC-to-AC oversizing for maximum solar harvest from complex roof layouts. Integrated Energy Management System coordinates real-time power flow between solar generation, battery storage, grid connection, and backup loads with 97.8% maximum efficiency and 0ms backup transfer time.
Single SKU supports six power ratings from 3.8kW to 11.5kW through software configuration so no need to stock multiple models.
Instantaneous switchover protects sensitive electronics during grid outages means zero interruption to connected loads.
Four MPPT channels with 2:1 DC/AC ratio maximize solar harvest from complex arrays with multiple orientations. 600V max input.
| Specification | Value |
|---|---|
| Power Ratings | 3.8 / 4.8 / 5.7 / 7.6 / 9.6 / 11.5 kW (field configurable) |
| MPPT Channels | 4 Independent, 50-550V range, 600V max input |
| Maximum Efficiency | 97.8% |
| Backup Switchover | 0 milliseconds |
| Battery Range | 300-600V DC |
| Output | Split-phase 240/120V |
| Enclosure Rating | NEMA 4X (outdoor rated) |
| Warranty | 10 years manufacturer warranty |
| Certifications | UL 1741 SB, IEEE 1547-2018, UL 1998, NEC Compliant |

Scale your storage from 6kWh to 100+ kWh
Modular LiFePO₄ (Lithium Iron Phosphate) battery modules delivering enhanced thermal stability, and inherent safety. Available in 6.02 kWh and 9.04 kWh configurations with 97% usable capacity. Features self-guiding plug connectors for rapid installation, AI-assisted battery management, and parallel connection architecture for scalable capacity expansion up to 100+ kWh. View all battery pack combinations.
Intelligent battery management algorithms through mySigen App optimize charge/discharge cycles for extended battery life and maximum efficiency
Full 97% depth of discharge (DoD) without degradation, maximizing your energy storage investment with no derating.
Comprehensive safety systems with built-in optimizer and Type 4X outdoor-rated enclosure for maximum reliability.
| Specification | Value |
|---|---|
| Available Capacities | 6.02 kWh | 9.04 kWh per module / 54.24 KWh max per Stack |
| Chemistry | LiFePO₄ (Lithium Iron Phosphate) |
| Dimensions | 30.2 × 10.6 × 10.4 in |
| Depth of Discharge | 100% (97% usable capacity) |
| Scalability | Up to 100+ kWh (parallel connection) |
| Operating Temperature | -4°F to 131°F (-20°C to 55°C) |
| Enclosure Rating | Type 4X (indoor/outdoor) |
| Mounting | Floor-standing or wall-mounted |
| Cooling | Natural convection (maintenance-free) |
| Warranty | 10 year Product Warranty |
| Certifications | UL 1973, UL 1998, UL 9540, UL9540 A, UN 38.3, CP 65, FCC Part 15 Class B |

Intelligent backup power that prioritizes critical loads
Advanced backup power management system featuring patented 0ms load-side disruption technology for seamless grid-to-backup transitions. Manages bidirectional power flow between grid connection, solar generation, battery storage, generator sources, and protected loads through integrated monitoring and switching. Supports connection of up to 2 SigenStor units with five independent smart load ports for prioritized backup power distribution.
Patented zero-millisecond load-side disruption protects sensitive electronics during transitions—your WiFi never drops.
Prioritized backup distribution with remote control—64A continuous per port lets you manage what stays on during outages.
2-wire auto-start capability for extended backup duration during prolonged outages—seamless handoff between battery and generator.
| Specification | Value |
|---|---|
| Max Continuous Current | 200A (grid & main panel) |
| SigenStor Connections | Up to 2 units, 48A per connection |
| Smart Load Ports | 5 ports, 64A continuous each, 80A OCPD |
| Generator Port | 64A, 2-wire auto-start supported |
| Transfer Time | 0 milliseconds |
| Grid connection type | Split Phase |
| Dimensions | 21" x 32" x 7" |
| Enclosure | Type 3R, Wall-mounted |
| Warranty | 10 years product warranty |
| Certifications | FCC Part 15 Subpart B, ICES-003, ANSI C63.4a:2017, UL 67, UL 869A, UL 1741, UL 1741 PCS CRD, CSA C22.2 No.107.1-16, CA Proposition 65 |

Fast charge your EV or power your home from your car during outages
Professional-grade 25kW DC fast charger delivering bi-directional power flow for rapid EV charging and Vehicle-to-Home (V2H) / Vehicle-to-Grid (V2G) applications. DC-coupled architecture enables direct solar-to-vehicle charging without AC conversion losses, achieving 100% renewable energy utilization. Dual CCS1 and NACS connector compatibility supports all North American EV platforms. V2H capability transforms EV batteries into mobile backup power sources (75-100 kWh typical).
Approximately 150 km driving range per hour of charging with bi-directional capability & World's first V2X-integrated all-in-one home energy system
Dual CCS1 and NACS connectors support all North American EVs including Tesla, Ford, GM, Rivian—150-1000V range.
Transform your EV into 75-100 kWh of mobile backup power (more when coupled with Sigen battery) or enable grid services revenue generation.
| Specification | Value |
|---|---|
| Charging Power | 25 kW (bi-directional) |
| Output Voltage Range | 150-1000V DC |
| Maximum Current | 80A |
| Connector Types | CCS1 / NACS (North American standard) |
| Cooling Method | Smart Air Cooling |
| Enclosure Rating | IP66 / NEMA 4X |
| Charging Modes | V2H, V2G, Smart Load Management, 100% Solar |
| Architecture | DC-coupled (direct solar integration) |
| Installation | Wall-mounted, outdoor rated |
| Warranty | 3 years product warranty |

Charge your EV faster at home while maximizing solar energy and avoiding peak utility rates
The Sigenergy Sigen EVAC 11.5 is an intelligent 11.5kW Level 2 AC EV charger engineered for seamless integration with SigenStor Energy Storage Systems to deliver 100% solar-powered charging. This wall-mounted charger prioritizes surplus PV production and stored battery energy to minimize grid imports and reduce utility costs, while supporting both SAE J1772 and NACS (Tesla) standards across a 208–240V nominal voltage range with adjustable output current from 6–48A.
Delivers up to 11.5kW of AC charging power with adjustable 6–48A output, ideal for fast overnight home charging on 208–240V circuits.
Supports both NACS (Tesla) and SAE J1772 charging standards for compatibility with all North American electric vehicles.
Integrates with SigenStor, AI tariff optimization, and dynamic load management to prioritize solar surplus and prevent service overloads.
| Specification | Value |
|---|---|
| Model | Sigen EVAC 11.5 |
| Nominal Charging Power | 11.5 kW |
| Nominal Output Voltage | 208 – 240 V |
| Output Current Range | 6 – 48 A |
| Nominal AC Frequency | 60 Hz |
| Charging Connector | NACS SAE J3400 / SAE J1772 compatible |
| AC Input Connection | Hard-wired |
| Enclosure Protection | NEMA 4X / IK10 |
| Dimensions (W × H × D) | 9.21 × 15.12 × 5.35 in (234 × 384 × 136 mm) |
| Weight | 16.3 lbs (7.4 kg) |
| Cooling Method | Natural Convection |
| Cable Length | 25 ft (7.5 m) |
| Installation Method | Wall-mounted (Indoor/Outdoor) |

Supports 2G / 3G / 4G mobile networks with a plug-and-play setup. Features a NEMA 4X-rated enclosure for durable, weather-resistant performance in all conditions.

Offers 1% high-accuracy real-time power detection with a 100 ms data refresh rate. Displays info via LCD and integrates instantly with PointGuard Home.

Protect your Power Sensor in rugged environments with a weatherproof, tamper-resistant outdoor enclosure. Ideal for exposed or high-traffic installations.
| SigenStor Part Number |
Controller Configuration |
Battery Pack Configuration | Max Continuous Output Power (kW) |
Total System Energy (kWh) |
|
|---|---|---|---|---|---|
| Model | BAT 6.0 US | BAT 9.0 US | |||
| SigenStor-11.5-6.02 | SigenStor EC SP US | 1 | 0 | 11.5 | 6.02 |
| SigenStor-11.5-9.04 | SigenStor EC SP US | 0 | 1 | 11.5 | 9.04 |
| SigenStor-11.5-12.04 | SigenStor EC SP US | 2 | 0 | 11.5 | 12.04 |
| SigenStor-11.5-15.06 | SigenStor EC SP US | 1 | 1 | 11.5 | 15.06 |
| SigenStor-11.5-18.08 | SigenStor EC SP US | 0 | 2 | 11.5 | 18.08 |
| SigenStor-11.5-21.08 | SigenStor EC SP US | 2 | 1 | 11.5 | 21.08 |
| SigenStor-11.5-24.10 | SigenStor EC SP US | 1 | 2 | 11.5 | 24.10 |
| SigenStor-11.5-27.12 | SigenStor EC SP US | 0 | 3 | 11.5 | 27.12 |
| SigenStor-11.5-30.12 | SigenStor EC SP US | 2 | 2 | 11.5 | 30.12 |
| SigenStor-11.5-33.14 | SigenStor EC SP US | 1 | 3 | 11.5 | 33.14 |
| SigenStor-11.5-36.16 | SigenStor EC SP US | 0 | 4 | 11.5 | 36.16 |
| SigenStor-11.5-39.16 | SigenStor EC SP US | 2 | 3 | 11.5 | 39.16 |
| SigenStor-11.5-42.18 | SigenStor EC SP US | 1 | 4 | 11.5 | 42.18 |
| SigenStor-11.5-45.20 | SigenStor EC SP US | 0 | 5 | 11.5 | 45.20 |
| SigenStor-11.5-48.20 | SigenStor EC SP US | 2 | 4 | 11.5 | 48.20 |
| SigenStor-11.5-51.22 | SigenStor EC SP US | 1 | 5 | 11.5 | 51.22 |
| SigenStor-11.5-54.24 | SigenStor EC SP US | 0 | 6 | 11.5 | 54.24 |
* This represents the system's maximum continuous AC output power. The actual output depends on the most restrictive component: it cannot exceed the inverter's power rating and is also limited by the total DC power available from the PV modules and battery combined.
Established in 1998, we're a stable, trusted partner for thousands of solar professionals nationwide. We'll be here when you need us.
Our team of certified solar professionals provides pre-sale system design consultation and post-sale technical assistance throughout your project.
Direct manufacturer relationships and volume purchasing power means competitive pricing on every Sigenergy component. Volume discounts available.
We stock everything you need: panels, racking, inverters, batteries, and balance of system components from trusted manufacturers.

Customized solutions available for residential rooftops, optimizing space and energy production.
Learn MoreCheck out our entire selection of Lithium Batteries perfect for on-grid and off-grid energy storage.
Learn MoreWe have the best residential solar system solution for your ground mount solar project at a low wholesale price.
Learn More