Deka Duration DD100-24H
| Model | DD100-24H |
| Nominal Voltage | 24V |
| Capacity | 100Ah |
| Chemistry | LiFePO4 (Lithium Iron Phosphate) |
| Efficiency | 99% |
| Cycle Life | 6,000 cycles at 80% DoD |
| Usable Depth of Discharge | 100% |
| Max Charge / Discharge Current | 100A / 120A |
| Charge Temperature (Heated) | -4°F to 140°F |
| Dimensions | 19.1" L x 6.8" W x 9.2" H |
| Weight | 50 lbs |
| Case / IP Rating | ABS+PC Fire Rated / IP67 |
| Built-in BMS | Internal with Automatic Cell Balancing |
| Certifications | UN38.3, UL 1973, UL 9540A (cell), IEC 62619, CE |

MAPPS® NEMA 3R enclosures with Deka Duration LiFePO4 batteries and pre-wired charge controllers, ready for field deployment.
Deka Duration DD100-24H 24V 100Ah Heated LFP Battery
SKU DEKA-DD100-24H-LFP-MONO
DD100-24H 24V Heated Monobloc LFP Battery
The Deka Duration DD100-24H is a 24V 100Ah heated LiFePO4 monobloc that delivers native 24 V power from a single drop-in battery. Built for demanding industrial and off-grid environments, it powers SCADA and RTU cabinets, security cameras, obstruction lighting, traffic equipment, telecom sites, and remote solar systems where lead-acid banks would need replacement every few years.
The heated design charges from -4°F to 140°F for dependable cold-climate operation, while the sealed ABS+PC fire-rated case with IP67 rating shrugs off dust and water in outdoor enclosures. Rated for 6,000 cycles at 80% depth of discharge with 100% usable capacity and 99% efficiency, the 50 lb DD100-24H scales up to 16 units in parallel as system loads grow.
Deka Duration DD100-24H Battery Features
- 24V 100Ah LiFePO4: Native 24 V monobloc rated for 6,000 cycles at 80% DoD with 99% efficiency and 100% usable depth of discharge.
- Heated for Cold Climates: Charges across a -4°F to 140°F range, keeping remote sites powered through winter without external heating.
- Integrated BMS: Internal Battery Management System with automatic cell balancing, 1200A / 500μs short-circuit protection, and high-temperature cut-offs.
- IP67 Fire-Rated Case: Sealed ABS+PC housing rated IP67 against dust and water for outdoor cabinets and enclosures.
- Scalable Drop-In Design: Supports up to 16 units in parallel with M8 threaded-insert terminals for direct replacement of 24V lead-acid banks.
Deka Duration Smart LFP Technology

Deka Duration Smart LFP batteries pair an internal BMS with automatic cell balancing to keep every cell healthy across the battery's 6,000-cycle service life. Low internal resistance under 30 mΩ and just 3% self-discharge per month deliver steady, maintenance-free power, and certified cells (UL 9540A, UN38.3, IEC 62619) back the fire-rated construction for one lithium install where lead-acid would cycle through repeated replacements.

Deka Duration DD100-24H Technical Review
The Deka Duration DD100-24H delivers 100Ah at a native 24V from LiFePO4 chemistry with an internal BMS, giving system designers a single-battery replacement for 24V lead-acid banks in industrial, telecom, SCADA, and off-grid solar applications. Charging runs at a recommended 50A (100A max) with a 28.4V absorption and 27.6V float profile, while discharge supports 100A continuous (120A max) with a 500A three-second surge for demanding loads. The heated design operates and charges from -4°F to 140°F, and the BMS adds automatic cell balancing, 1200A / 500μs short-circuit protection, and high-temperature cut-offs. Rated for 6,000 cycles at 80% depth of discharge with 100% usable capacity, 99% efficiency, and internal resistance under 30 mΩ, the 50 lb IP67 ABS+PC fire-rated monobloc scales to 16 units in parallel and carries UN38.3, UL 1973, UL 9540A (cell), IEC 62619, and CE certifications.
Contact Us Today Request a Wholesale Quote Toll Free: 877-297-0014

MAPPS® Systems: Now Available with Deka Duration LiFePO4

MAPPS-50-108-12
12 VDC pole-mounted system with SES 20J-V 20W solar module and side-of-pole HPM mount. Drop-in Deka Duration LiFePO4 replaces the 8GU1H gel cell at 36 Ah capacity.
View System
MAPPS-300-265-24
24 VDC pole-mounted system with 2x SES 150J-V modules on an SPM2-150 side-of-pole mount. Drop-in Deka Duration LiFePO4 replaces the 8G8D gel bank at 265 Ah capacity.
View System
MAPPS-1200-1060-24-PAD
24 VDC pad-mounted system with 6x SES 200J-V modules on a low-profile ground mount. Drop-in Deka Duration LiFePO4 replaces 8x 8G8D gel cells at 1,060 Ah capacity.
View System
Drop-in lithium batteries, backup
power systems, and off-grid energy storage
available at low wholesale prices
Contact Us Today!
MAPPS Pad & Pole-Mounted Systems
Complete pole, pad, and ground mounted pre-wired solar power systems at a low wholesale price.
Learn MoreMAPPS Class 1 Div 2 Solar Panel Systems
Complete Class 1 Div 2 Solar Panel Systems featuring Class 1 Division 2 solar panels and NEMA enclosures.
Learn MoreView All Lithium Batteries
Check out our entire selection of Lithium Batteries perfect for on-grid and off-grid energy storage.
Learn More
