Deka Unigy II 2AVR125-33 Spacesaver Battery System ModuleSKU DEKA-UNIGY-2AVR125-33
Deka Unigy II 2AVR125-33 Spacesaver™ Battery System Module
The Deka Unigy II 2AVR125-33 battery by East Penn Manufacturing features 2x AVR125 battery cells with 33 plates per cell. This battery is designed for 4 volt systems and features a 2,930 AHr capacity @ 100 hour rate.
Unigy II 2AVR125-33 Spacesaver Module Options
This Unigy II battery is available in an interlock module:
Complete Unigy II Spacesaver™ Interlock™ Module Battery System (shown with 3-cell modules)
One-Piece Base Interlock - This module requires only front access bolts for mounting. This module option meets UBC 97 (Interlock™ only) Zone 4 top of building requirements. These Interlock Modules are certified to 8 modules high, top of building. A complete 2AVR125-33 module system is only available with the Interlock™ system with one-piece base for easier transport and installation
Front termination is standard.
Unigy II 2AVR125-33 Battery Features & Benefits
|Container and Cover||Impact-Resistant Polypropylene, UL 94 V-0, 28% L.O.I.|
|Separators||Microporous Glass Mat|
|Individual Plate Formation||Shipped at 100% Capacity|
|Cycle Life||2400 cycles @ 20% DOD|
The dimensions on the left are represented by the images below:
Unigy II Spacesaver One-Piece Base for
Interlock™ vs. Non-Interlock Modules
The patented design of the Interlock™ Module allows for front access bolting. Rear bolting is required for three-piece base non-interlock modules. The dimensions and weight of each are slightly different.
Contact us toll-free: (877) 297-0014
Deka Unigy II Spacesaver is the Dependable Choice
Deka Unigy II Spacesaver battery systems are constructed using the finest quality materials and state-of-the-art manufacturing techniques and are known for their high reliability and superior performance. They are ideal for larger, battery-based solar systems that demand high performance and a long cycle life.
This line of Unigy II batteries utilizes a smaller footprint to save space while providing optimal power. The new reduction in space enables less restriction for ground and vertical space confinements and meets UBC 97 Zone 4 (Interlock™ only) specifications, certified up to 8 modules high. Assembly is quick and easy with a simplified, yet advanced layout configuration and “two-way” post design allowing quick connector assembly and optimized current transfer.
Unigy II 2AVR125-33 battery powered applications:
This Unigy II battery, when combined with others in a complete Spacesaver system, is ideal for powering telecommunications, island power, cellular radio, microgrid, remote wi-fi, railroad signs/communication, remote residential, grid-tie battery backup, and uninterruptible power sources (UPS).
The 2AVR125-33 features built-in advanced features such as:
- “Two Way” Post design is lead plated solid copper providing a large contact area with front access bolting for easier installation and maintenance.
- Pure Virgin Lead (99.99%) positive grid alloy is very resistant to corrosion/growth.
- Positive and Negative plates are formed with IPF® technology to ensure plates operate at 100% capacity.
- Collapsible bottom bridge accommodates for normal plate growth, reducing stress on battery post seals.
- Air Gap between cells has been designed to reduce foot print while maintaining required cooling.
- Front safety shield design easily slides on and off without tools for quicker assembly.
EPM Unigy II products are designed to meet the requirements of IEC 60896-21/22, BS 6290 and SR-4228.
Expected life of a properly maintained Unigy II system can be up to 20 years.