Skip to content
Unigy II Spacesaver
Unigy II Model Number 3AVR95-17
Module Voltage 6 Volts
Number of Cells 3
Number of Plates per Cell 17
Cell Voltage 1.75
Capacity @ 25 Hr. Rate 904 AHr
Capacity @ 100 Hr. Rate 1076 AHr
Interlock Module Length 21.9 in.
Interlock Module Depth 27.88 in.
Interlock Module Height 9.54 in.
Interlock Module Weight 419 lbs.
Non-Interlock Module Length 21.9 in.
Non-Interlock Module Depth 27.12 in.
Non-Interlock Module Height 9.48 in.
Non-Interlock Module Weight 404 lbs.
Deka Unigy II Spacesaver US Made battery

Deka Unigy II 3AVR95-17 Spacesaver Battery System Module

Deka - East Penn Manufacturing

Deka Unigy II 3AVR95-17 Spacesaver™ Battery System Module

The Deka Unigy II 3AVR95-17 Battery by East Penn Manufacturing features 3x AVR95 battery cells with 17 plates per cell. This battery is designed for 6 volt systems and features a 1076 AHr capacity rating @ 100 hour rate.

A complete module system utilizes one of two types of bases for easier transport and installation.

Unigy II Spacesaver Module Options

The Unigy II Spacesavers are available in two models:

Unigy II Spacesaver
Complete Unigy II Spacesaver™ Interlock™ Module Battery System (shown with 3-cell modules)
  • One-Piece Base Interlock - This module requires only front access bolts for mounting. This module option meets UBC 97 (Interlock™ only) Zone 4 top of building requirements. These Interlock Modules are certified to 8 modules high, top of building.
  • Three-Piece Base Non-Interlock- This module has front and rear access bolts for mounting. This Non-Interlock model meets UBC 97 Zone 2B top of building requirements – Zone 4. These Non-Interlock Modules are certified up to to 8 modules high on ground level.

Battery Termination

Front termination is standard.

  • Top termination will add 7.75" to the overall height.
  • Side termination will add 4.5" to each side for termination.
  • Unigy II 3AVR95-17 Battery Features & Benefits

    Container and Cover Impact-Resistant Polypropylene, UL 94 V-0, 28% L.O.I.
    Separators Microporous Glass Mat
    Individual Plate Formation Shipped at 100% Capacity
    Cycle Life 2400 cycles @ 20% DOD
    The dimensions on the left are represented by the images below:

    AVR95 Module Review

    The patented design of the Interlock™ Module allows for front access bolting. Rear bolting is required for three-piece base non-interlock modules. The dimensions of each are slightly different.

    EPM Unigy II products are designed to meet the requirements of IEC 60896-21/22, BS 6290 and SR-4228.

    Deka Unigy II

    Deka Unigy II Spacesaver is the Dependable Choice

    Deka Unigy II Spacesaver battery systems are constructed using the finest quality materials and state-of-the-art manufacturing techniques and are known for their high reliability and superior performance. They are ideal for larger, battery-based solar systems that demand high performance and a long cycle life.

    This line of Unigy II batteries utilizes a smaller footprint to save space while providing optimal power. The new reduction in space enables less restriction for ground and vertical space confinements and meets UBC 97 Zone 4 (Interlock™ only) specifications, certified up to 8 modules high. Assembly is quick and easy with a simplified, yet advanced layout configuration and “two-way” post design allowing quick connector assembly and optimized current transfer.

    Unigy II 3AVR95-17 battery powered applications:

    This Unigy II battery, when combined with others in a complete Spacesaver system, is ideal for powering telecommunications, island power, cellular radio, microgrid, remote wi-fi, railroad signs/communication, remote residential, grid-tie battery backup, and uninterruptible power sources (UPS).

    Unigy II battery module cell Unigy II battery cell

    The 3AVR95-17 features built-in advanced features such as:

    • “Two Way” Post design is lead plated solid copper providing a large contact area with front access bolting for easier installation and maintenance.
    • Pure Virgin Lead (99.99%) positive grid alloy is very resistant to corrosion/growth.
    • Positive and Negative plates are formed with IPF® technology to ensure plates operate at 100% capacity.
    • Collapsible bottom bridge accommodates for normal plate growth, reducing stress on battery post seals.
    • Air Gap between cells has been designed to reduce foot print while maintaining required cooling.
    • Front safety shield design easily slides on and off without tools for quicker assembly.

    EPM Unigy II products are designed to meet the requirements of IEC 60896-21/22, BS 6290 and SR-4228.
    Expected life of a properly maintained Unigy II system can be up to 20 years.

    Quantity Deka Unigy II battery module discounts & complete systems available.

    With decades of experience, Solar Electric Supply has the friendly, knowledgeable staff for just about any large battery powered project.

    Contact us toll-free: (877) 297-0014

    Contractor Discounts Available      Unigy II Spacesaver Battery System Modules

    Contact us for sales, quantity discounts and expert reviews for the Deka Unigy II 3AVR95-17 Spacesaver battery system module.