Toll Free: 877-297-0014 Direct: 831-462-8243 Fax: 831-462-8246

OUTBACK FLEXware1000

Availability: Call For Availability

Quick Overview

The FLEXware 1000 system architecture is capable of supporting
up to four OutBack FX Series Inverter/Chargers, four OutBack charge
controllers, and all the required AC and DC components and wiring.
Utilizing a compact design, FLEXware 1000 AC and DC enclosures
accommodate all of the essential protective devices with lots
of room for additional breakers and large cable connections and
can be mounted either vertically or horizontially.


OUTBACK FLEXware1000

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Manufacturer Specification Sheets

View FileFW1000 installation    Size: (1.41 MB)

Details

Model: FW1000-DC

DC enclosure which mounts at the DC side of three or four FX Series Inverter/Chargers. Supports eight terminal bus bars (not including GBB) and up to three shunt assemblies (depending on configuration).
Includes: Ground bus bar, 1000 Amp DC shunt assembly, positive bus, breaker mounting hardware, enclosure mounting hardware, two FW-SBUS and one FLEXware 1000 breaker bus.

Model
Unit Dimensions(H x W x D)
Shipping Dimensions(H x W x L)
Shipping Weight
Enclosure Type
FW1000-DC 38.5 x 11.4 x 12.1"
(97.8 x 29 x 30.7 cm)
14.5 x 13.6 x 40.6"
(36.8 x 34.5 x 103.1 cm)
21lbs. (9.1kg) Type-1 indoor(IP30)

Model: FW1000-AC

Description:AC enclosure which mounts at the AC side of three or four FX Series Inverter/Chargers. Supports eight terminal bus bars and one FW-X240. The FW1000 system utilizes two FW-MPs (mounting plates) and a set of the DCA and ACA conduit adapters for each inverter/charger. DC and AC breakers, Input-Output-Bypass Assemblies and all other additional components sold separately.
Includes: Ground bus bar, two DIN mounting brackets and FLEXware 1000

Model
Unit Dimensions(H x W x D)
Shipping Dimensions(H x W x L)
Shipping Weight
Enclosure Type
FW1000-AC 38.5 x 11.4 x 12.1"
(97.8 x 29 x 30.7 cm)
14.5 x 13.6 x 40.6"
(36.8 x 34.5 x 103.1 cm)
21lbs. (9.1kg) Type-1 indoor(IP30)

• The FW1000 system utilizes one FW-MP mounting plate and a set of the DCA and ACA conduit adapters for each inverter/charger.
• DC and AC breakers, Input-Output-Bypass Assemblies and all other additional components sold separately.

Breaker Configuration

AC side:
The breaker configuration will hold up to thirty-two DIN mount breakers (not included). The FW1000 has support for an optional AC Input-Output-Bypass Assembly. AC breakers are rated from 10-60 Amps of Amps of AC current.

DC Side:
Holds up to eleven 0.75" (19mm) wide breakers rated for 1-80 Amps of DC current, nine 1" (26mm)wide breakers rated for 100 or 125 Amps of DC current or six 1.5" (32mm) wide breakers rated for 175 or 250 Amps of DC current.


FLEXware 1000 AC Input-Output-Bypass Assemblies Field installable kit for bypassing the AC input to the AC output for inverter maintainence or installation. Also provides over-current protection.

Model: FW-IOB-T-120/208VAC

Includes:Nine 60A 120VAC single pole DIN mount breakers, sliding bypass interlock plate, wire and hardware kit

System Rating
Bypass Breaker
Input Breaker
Output Breaker
Two Phase 120/208VAC
60 Amp 21.6 kW
Three Poles @ 60 Amps 21.6 kW Three Poles @ 60 Amps 21.6 kW Three Poles @ 60 Amps 21.6 kW

Model: FW-IOB-Q-120/240VAC

Includes:Eight 60A 120VAC single pole DIN mount breakers, two 60A 120VAC dual pole DIN mount breakers sliding bypass interlock plate, wire and hardware kit

System Rating
Bypass Breaker
Input Breaker
Output Breaker
Split Phase 120/240VAC
120 Amp 28.8 kW
Four Poles @ 60 Amps 28.8 kW Four Poles @ 60 Amps 28.8 kW Four Poles @ 60 Amps 28.8 kW