|Module Cell Type||Multicrystalline|
|Open Circuit Voltage (V)||21.0|
|Short Circuit Current (A)||1.94|
|Power % ±||-10/10|
This solar panel is available with our
Systems include everything you need to power your remote equipment: solar module, mounting structure, wiring harness, battery enclosure, charge controller, sealed battery and installation manual.
Case or pallet quantities are available for
OEM's and Industrial Customers
Contact us for pricing.
SES 330J 30W BP SX330J Solar PanelSKU SES-330J
SES 330J 30W BP SX330J Solar Panel
The SES 330J is available with our
SES MAPPS solar systems.
(replaces the discontinued BP Solar SX330J)
The SES 330J 30 Watt solar panel is part of SES's rugged industrial off grid series. These high quality solar modules provide cost-effective photovoltaic power for DC battery charging systems. With 36 multicrystalline cells in series, this panel charges batteries efficiently in any climate.
The SES 330J is a BP SX solar panel replacement intended for 12VDC solar battery charging systems (charge controller required). It may be wired in series for higher nominal voltages. It is ideal for longevity outdoors; with an anodized aluminum frame and tempered glass face.
The SES 330J is approved for applications in NEC Class 1, Division 2 Groups A, B, C & D hazardous locations and approved for explosion resistance. This certification is required near gas and oil pipelines.
The SES 330J is Built to Last
From mountaintops to vast oil fields, on weather stations in the bitter cold of Antarctica and on telephone signal repeaters in the hot Australian outback, the technology behind these reliable solar panels has been proven in the harshest environments.
Standard Junction Box
The SES 330J has has a weatherproof junction box and a very rugged frame. The standard terminals accept 8 AWG to 14 AWG wire. The raintight (IP65 Rated) junction box of the SES 330J accepts PG13.5 or 1/2" nominal conduit or cable fittings. With its four-terminal connection block, it enables most system array connections (putting modules in series or parallel) to be made right in the junction box. Simiar to the BP SX-30U.
Remote Industrial Applications:
The SES 330J is certified for use in
Class 1 Division 2 solar systems.
- Oil and gas metering
- Microwave Repeaters
- Two Way Radio & Microwave
- Class I Div 2 Solar Systems for oil/gas
- WIFI & WIMAX
- Security cameras
- Cellular Repeaters & Enhancers
- Water metering
- Security & Area Lighting
- Obstruction lights
ISO 9001 Certified:
ISO 9001 factory certification ensures that our manufacturing facilities use proven manufacturing and control processes.
Approval Listings and Qualifications:
- Certified according to the extended version of the IEC 61215 (ed. 2), EC 61215:2005-08 (Crystalline silicon terrestrial photovoltaic modules - Design qualification and type approval)
- Certified according to IEC 61730-1 and IEC 61730-2 (ed. 1), EN 61730-1:2007-05 and EN 61730-2:2007-05. (photovoltaic module safety qualification, requirements for construction and testing).
- Listed to UL 1703 & ULC ORD-C1703 Standard for Safety by Intertek ETL. Class C Fire Rating.
- Approved by Intertek ETL according to FM 3611, Dec 2004, and according to CAN/CSA C22.2 No. 213-M1987, 1st Edition, Reaffirmed 2004, for use in a Class I Division 2, Group A, B, C, D Hazardous (Classified) Location.
SES 330J PV Module Warranty
- Free from defects in materials and workmanship for 2 years
- 90% Min power output for 12 years
- 25 year warranty optional
*Refer to limited warranty certificate for terms and conditions
Contact us toll-free: (877) 297-0014.
Durable Frame and Backsheet
This solar module features a rugged weatherproof anodized aluminum frame for longevity in high-wind conditions. The thick, durable, scratch resistant backsheet provides extra insulation for increased protection against the elements and rough handling. The white polyester backsheet material lasts the life of the module and increases energy production.
Pre-drilled Mounting Holes
The anodized aluminum frame features clean pre-drilled mounting holes for solid grounding and attachment to the PV module mount.
SES 330J BP SX330J Solar Panel Review
Weathertight Conduit Ready Junction Box
This conduit ready J-type junction box has accessible terminals for easier module interconnections in off-grid solar PV systems. It features cable glands that allow for fitting of various cable sections. Gaskets are included. The box is securely attached to the module frame wall for added durability.
Cell interconnections and diode placement use well-established industry practices and are field-proven to provide excellent reliability.
We are a government approved vendor, Net 30 with PO.
The SES 330J is a direct bolt in replacement for the BP Solar SX-330J.