SES 140J SX3140J 140W Solar Panel

SES 140J SX3140J 140W Solar Panel

The SES 140J is available with our
SES MAPPS solar systems.

(replaces the discontinued BP Solar SX 3130J and 3140J)

The SES 140J 140 Watt solar panel is part of SES's rugged industrial off grid series. These high quality solar modules provide cost-effective photovoltaic power for DC loads with very high energy requirements. With 72 multicrystalline cells in series, this panel charges batteries efficiently in any climate.

The SES 140J is a BP SX replacement intended for 24VDC, 48VDC or 120/240VAC solar battery charging systems (charge controller required). It is ideal for longevity outdoors; with an anodized aluminum frame and tempered glass.

The SES 140J is approved for applications in NEC Class 1, Division 2 Groups A, B, C & D hazardous locations and approved for explosion resistance. This certification is required near gas and oil pipelines.

The SES 140J is Built to Last

From mountaintops to off-shore platforms, on weather stations in the bitter cold of Antarctica and on telephone signal repeaters in the hot Australian outback, the technology behind these reliable solar panels has been proven in the harshest environments.

Standard Junction Box

The SES 140J has has a weatherproof junction box and a very rugged frame. The standard terminals accept 8 AWG to 14 AWG wire. The raintight (IP65 Rated) junction box of the SES 140J accepts PG13.5 or 1/2" nominal conduit or cable fittings. With its four-terminal connection block, it enables most system array connections (putting modules in series or parallel) to be made right in the junction box.

Remote Industrial Applications:

The SES 140J is certified for use in
Class 1 Division 2 solar systems.

• Microwave Repeaters
• Two Way Radio & Microwave
• Class I Div 2 Solar Systems for oil/gas
• WIFI & WIMAX
• Security cameras
• Cellular Repeaters & Enhancers
• Oil metering
• Water metering
• Village Power & Forward Base Power
• Security & Area Lighting
• Obstruction lights

ISO 9001 Certified:

ISO 9001 factory certification ensures that our manufacturing facilities use proven manufacturing and control processes.

Approval Listings and Qualifications:

• Certified according to the extended version of the IEC 61215 (ed. 2), EC 61215:2005-08 (Crystalline silicon terrestrial photovoltaic modules - Design qualification and type approval)
   
• Certified according to IEC 61730-1 and IEC 61730-2 (ed. 1), EN 61730-1:2007-05 and EN 61730- 2:2007-05. (Photovoltaic module safety qualification, requirements for construction and testing).
   
• Listed to UL 1703 & ULC ORD-C1703 Standard for Safety by Intertek ETL. Class C Fire Rating.
   
• Approved by Intertek ETL according to FM 3611, Dec 2004, and according to CAN/CSA C22.2 No. 213-M1987, 1st Edition, Reaffirmed 2004, for use in a Class I, Division 2, Group A, B, C, D Hazardous (Classified) Location.

SES 140J PV Module Warranty

• Free from defects in materials and workmanship for 2 years
• 90% Min power output for 12 years
• 25 year warranty optional
  *Refer to limited warranty certificate for terms and conditions

Contact us toll-free: (877) 297-0014.