Outback Inverter
/ Charger - FX & VFX Series
OutBack FX
and VFX inverters are
modular "building block" sinewave inverter / charger that
can be used for both residential and commercial off-grid and grid-tie
applications with battery storage. Inverters are available in two
versions; a sealed, fan-cooled FX version and a higher powered ventilated
VFX version. Each inverter/charger module is a complete power conversion
system - DC to AC inverter, battery charger and AC transfer switch.
Additional inverter/chargers can be added at any time either in
parallel (120VAC), series (120/240VAC), or even three-phase (120/208)
configurations. This allows the system to be tailored to the specific
needs of the application, both at the time of installation and into
the future. With the addition of an X-240 autotransformer, multiple
inverter systems can be set up to provide 120/240 VAC split-phase
output with the ability to provide full power on either 120VAC leg
of the system. Up to ten inverters can be connected together to
provide up to 36 kW of continuous power capacity with the use of
the HUB and the MATE controller.
The inverter's
powerful battery charger operates in five stages: BULK (constant
current output), ABSORB (constant voltage output), FLOAT (reduced
voltage output), SILENT (no charger output) and EQUALIZE (constant
voltage regulation overcharging). Charge time in each stage is adjustable
to provide control and to maximize the performance ot the charger
and battery system.
Each OutBack
inverter has one programmable, auxiliary relay output connection
(AUX). The AUX terminal provides 12VDC output to run 12V cooling
or ventilation fans or operate an external relay to perform other
functions, such as remote generator starting (two-wire), to disconnect
external charging sources (such as solar panels), or to turn on
a diversion load for voltage regulation.
The built-in
transfer switch is rated for 60 amps. When an external source of
external power (whether a generator or the utility grid) is detected
at the "AC in" terminal on the inverter. The switch operates
to rransfer the loads to the expernal power source and then activates
the battery charger to recharge the battery bank.
Outback inverters
come with a standard 2-year warranty and are listed to UL 1741.
There are
several versions available:
|
Outback
Sealed Turbo
Designed
to survive harsh environments.
Turbo
versions include a fan to cool the heatsink.
These will survive high-humidity and corrosive salt air.
FX2012T
FX2524T
FX3048T
|
 |
|
|
Outback
Vented
Higher
battery charging capabilities.
Great
for less generator battery charging time (and less fuel!).
This is due to better cooling of the internal components of
the inverter/charger.
VFX2812
VFX3524
VFX3648
|
 |
|
|
Outback
Grid-Tie Sealed Turbo
Designed
to survive harsh environments.
Turbo
versions include a fan to cool the heatsink.
These will survive high-humidity and corrosive salt air.
GTFX2524
- Includes a built-in 55 Amp charger at 24VDC
GTFX3048 - Includes a built-in
35 Amp charger at 48VDC
|
|
|
|
Outback
Grid-Tie Vented
Higher
battery charging capabilites.
Great
for less generator battery charging time (and less fuel!).
This is due to better cooling of the internal components of
the inverter/charger.
GVFX3524
- Includes a built-in 85 Amp charger at 24VDC
GVFX3648 - Includes a built-in
45 Amp charger at 48VDC
|
|
Call
toll-free (877) 297-0014 for
Outback inverter information, accessories or reviews.
|
