Conext XW 6048 Inverter/Charger
|XW 6048 120 240 60|
|AC Nominal Power||6,000 Watts|
|Battery Charger Current||100 Amps|
|Battery Charging Voltage||48 Volts|
|CEC Weighted Efficiency||92.5%|
Wholesale pricing and custom designed
Schneider Electric Conext XW 6048 Inverter/ChargerSKU XW-6048-120-240-60
Schneider Electric Conext XW 6048 Inverter/Charger
One solution for off-grid solar or grid-tie battery-backup
The Conext™ XW 6048 120 240 60 inverter/charger is an adaptable pure sine wave, 60 Hz single-phase, split-phase or three-phase inverter/charger system. It has the capability of up to 6,000 watts of reliable continuous output power. The inverter has powerful grid-tie functionality and dual AC power inputs. The charger can charge a 48 Volt battery bank at up to 100 Amps! This model is the replacement for the Xantrex XW6048 inverter/charger in North America.
A complete Conext power system can feature solar charge controllers, monitoring, and automated generator control modules which enable further adaptability. From a single Conext XW unit to multiple clusters of units, up to 36 kW each, the Conext XW is a scalable system that allows for the integration of solar capacity as required.
Adaptable and scalable, the Schneider Electric Conext XW system is the one solution for global grid-interactive and off-grid, residential and commercial, solar and backup power applications.
- The Conext XW6048 is a hybrid inverter / charger, all in one enclosure
- 48 volt batteries are charged with 120 VAC / 240 VAC split-phase or solar panels with optional MPPT charge controller
- Charging with AC power can be accomplished with a generator or grid-power
- Dual AC power inputs
Scales to 36 kW for commercial or large urban electrification installations
Supports DC coupled and AC coupled solutions
- Battery temperature sensor is included for temperature compensation
- Wall mount is ideal for wiring purposes
- True sine wave provides clean output for sensitive electronics
- NEMA 1 Enclosure for safety and security. Intended for indoor mounting.
Conext XW Inverter Solar System Diagram with Xanbus Networking
Schneider Electric Conext™ XW 6048 60Hz Solar Inverter/Charger Review
The Conext XW 6048 by Schneider Electric is a hybrid Inverter with built-in charger. It will also accept 40V DC to 64V DC from a solar array for charging batteries with the MPPT-60-150 or MPPT-80-600 solar charge controller. It accepts 120VAC and 240VAC for the charging circuit.
It is typically wall mounted. The XW6048 includes a battery temperature sensor for temperature compensation. Time-tested Xanbus networking developed by Xantrex is used for its communication network.
The robust and reliable XW 6048 is ideal for off-grid solar applications or battery backup for power outages when on-grid supplemented with a solar array.
The XW6048 has a NEMA Type 1 enclosure. This is constructed for indoor use to provide a degree of protection to anybody from touching hazardous parts. It also provides a degree of protection of the equipment inside the enclosure from falling dirt or debris.
Contact us for low wholesale pricing, reviews or expert Conext XW system design - Toll-Free: (877) 297-0014.
Conext™ XW Inverter System Accessories:
Our experienced, professional staff is just a phone call away for reviews, advice or wholesale pricing on a Schneider Electric Conext XW 6048 inverter/charger.