Conext XW+ 5548 NA Solar Inverter/Charger
XW+ 5548 NA
|AC Nominal Power||5,500 Watts|
|Battery Charger Current||110 Amps|
|Battery Voltage||48 Volt Nominal|
|CEC Weighted Efficiency||93.0%|
Wholesale pricing and expert design for
Schneider Electric Conext XW+ 5548 NA Inverter/ChargerSKU XW+-5548-NA
Schneider Electric Conext XW+ 5548 NA Inverter/Charger
Complete Conext XW+ NA Systems
One solution for off-grid solar or grid-tie battery-backup
The Conext™ XW+ 5548 NA inverter/charger is an adaptable pure sine wave, 60 Hz single-phase, split-phase or three-phase inverter/charger system. It has the capability of up to 5,500 watts of reliable continuous output power. The inverter has powerful grid-tie functionality and dual AC power inputs. The charger can charge a 48 Volt battery bank at up to 110 Amps and supports charging of Lithium Ion battery packs. The Conext XW+ NA inverter line is the current equivalent to Xantrex XW inverter/chargers in North America.
A complete Conext power system can feature solar charge controllers, monitoring, and automated generator control modules which enable further adaptability. From a single Conext XW unit to multiple clusters of units, up to 36 kW each, the Conext XW+ NA is a scalable system that allows for the integration of solar capacity as required.
Adaptable and scalable, the Schneider Electric Conext XW+ NA solar inverter system is the one solution for global grid-interactive and off-grid, residential and commercial, solar and backup power applications.
- The Conext XW5548 NA is a hybrid inverter / charger, all in one enclosure
- 48 volt batteries are charged with 120 VAC / 240 VAC split-phase or solar panels with optional MPPT charge controller
- Charging with AC power can be accomplished with a generator or grid-power
- Two AC power inputs
- Scales to 36 kW for commercial or large microgrid installations
- Supports DC coupled and AC coupled solutions
- Supports charging of Lithium Ion battery packs
- Battery temperature sensor is included for temperature compensation
- Wall mount is ideal for wiring purposes
- True sine wave provides clean output for sensitive electronics
- NEMA 1 Enclosure for safety and security. Intended for indoor mounting.
Conext XW+ NA Inverter Solar System Diagram with Xanbus Networking
Schneider Electric Conext™ XW+ 5548 60Hz Solar Inverter/Charger Review
The Conext XW 5548 by Schneider Electric is a hybrid Inverter with built-in charger. It will also accept 40V DC to 64V DC from a solar array for charging batteries with the MPPT-60-150 or MPPT-80-600 charge controller. It accepts 120VAC and 240VAC for the charging circuit.
It is typically wall mounted. The XW5548 includes a battery temperature sensor for temperature compensation. Time-tested Xanbus networking developed by Xantrex is used for its communication network.
The robust and reliable XW 5548 is ideal for off-grid solar applications or battery backup for power outages when on-grid supplemented with a solar array.
The XW5548 has a NEMA Type 1 enclosure. This is constructed for indoor use to provide a degree of protection to anybody from touching hazardous parts. It also provides a degree of protection of the equipment inside the enclosure from falling dirt or debris.
Contact us for low wholesale pricing, reviews or expert system design - Toll-Free: (877) 297-0014.
Conext™ XW+ NA Inverter System Accessories:
Our experienced, professional staff is just a phone call away for reviews, advice or wholesale pricing on a Schneider Electric Conext XW+ 5548 NA inverter/charger.