![]() |
|
S-5! CorruBracket 100T

The S-5! CorruBracket 100T is a solid weatherproof mounting solution for corrugated metal roofs.


S-5 CorruBracket 100T & 100T Mini
S-5! CorruBracket 100T is the right way to attach solar panel arrays to common corrugated roofing profiles. Solar panel mounting is accommodated via rail or DirectAttached™ methods. Contact us for expert advice.
The standard CorruBracket 100T is 1-3/4" long with 4 mounting holes. The CorruBracket 100T Mini is shorter and has 2 mounting holes.

Combined with the S-5-PV Kit, the CorruBracket 100T Mini is an integrally grounded solar panel mounting solution.
The CorruBracket 100T is affixed to the crest of the corrugation, leaving the drainage plane free of holes to protect against leaks. For medium-duty applications, the bracket can be attached directly to the sheeting, accommodating ancillary attachment anywhere along the corrugation. For heavy-duty applications, the bracket can be fixed into the underlying substrate for additional support without crushing the corrugation.
Having no messy sealants to apply, CorruBracket 100T comes with a factory-applied EPDM rubber gasket seal already on the base, and the S-5!®-patented reservoir conceals the EPDM from UV exposure, preventing UV degradation.
The slotted top hole, which accommodates standard M8 nuts and bolts, simplifies alignment and maximizes flexibility in attaching ancillaries. A structural aluminum attachment bracket, CorruBracket 100T is compatible with most common metal roofing materials. S-5!'s holding strength is unmatched in the industry.
CorruBracket 100T MiniThe CorruBracket™ 100T Mini is a bit shorter than its standard counterpart and has two pre-punched holes in its base rather than four. The 100T Mini is a common choice for attaching the S-5-PV-Kit. |
|
|
CorruBracket 100T Dimensions |
CorruBracket 100T Mini Dimensions |
![]() |
1. CorruBracket 100T Mini 2. M8-1.25 Bolt 3. Roof Panel Sample 4. M8 Hex Flange Nut |
CorruBracket Installation Review
All CorruBrackets are mounted directly into the crest of the corrugation, straddling the valley. No surface preparation is necessary; simply wipe away excess oil and debris, align, and apply. Secure directly into the crest of the corrugation by driving the appropriate screws into the pre-punched holes, or pre-drilling the proper-sized hole through the pre-punched holes and riveting.
Installation steps shown with CorruBracket 100T. The "Mini" version has two mounting holes.
For design assistance and wholesale CorruBracket 100T prices, contact us toll-free: (877) 297-0014.
Literature |